Body and Antenna's not done in this photo
Fabric Requirements
This wedge was cut from strip set 1 and is in order from background color to main body color
A = Background 1 5/8 yard
B = Main Body Color1 3/4 yard
C = 1/3 yard
D = 1/4 yard
E = 1/2 yard
F = 1/3 yard
G = 3/8 yard
H = 1/2 yard
Bias Binding = 1/2 yard
Backing = 3 1/4 yard
Batting 54" x 54"
Bias Bars for Antenna's = 1/4 yard
Cutting
Cut each yardage piece in half along the center fold before cutting strips. All strips should measure approximately 22" rather than the full fabric width.
Cut strips in the widths shown below. Group and label the strips according to width and letter.
Color A - Background
Two Strips - 23" wide
One Strip - 11" wide
One Strip - 9 1/2" wide
One strip 8 " wide
One strip - 7" wide
One strip - 5 1/2" wide
One strip - 5" wide
One strip - 4" wide
One strip 3" wide
One strip 2" wide
Color B - Main Body Color
One strip - 16" wide
Two strip - 14" wide
One strip - 13" wide
Two strips - 12 1/2" wide
One strip - 11" wide
One strip - 9 1/2" wide
One strip - 8" wide
Color C
Two strips - 2 1/2" wide
One strip - 2" wide
One strip - 1 1/2" wide
One strip - 1" wide
Color D
Nine strips - 3/4" wide
Color E
Five strips - 3" wide
Four strips - 2 1/2" wide
Color F
Five strips - 1 1/2" wide
Two strips - 1" wide
Color G
Nine strips - 2" wide
Color H
Nine strips - 1" wide
Two bias grain strips 1" x 10" for Antenna but you can do out of any color you want... up to you.
Next Step... SEWING STRIP SETS
|
