  |
|---|
Part 2
Sew Strip Sets in order shown and label your strip sets
Very Important - IRON ALL SEAMS
Next Step - Cutting Wedges
Lay the ruler or wedge template on your strip set according to the photos above. Example - Strip set 9 above shows 15" in wedge - you lay the 15" line on the seam where the background meets with the first strip then cut your wedge from there. Each strip set gets cut with a different mark on the ruler or template. NOTE: My ruler is a 9 degree ruler all the photos show cutting for 10 degree ruler so additional wedges you will need from Strip set 6 - you need four wedges (not two like photo shows) and Background Wedges you need 10 wedges (not 8 like photo shows)
